15 Reasons To Not Be Ignoring Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Is your uPVC window or door mechanism not working properly? Maybe the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.

You'll be wasting energy if your double-glazed doors don't function properly. This also increases the chance of burglary. Owen the Locksmith can repair your door lock for reasonable costs.

Snapped Key

If a key breaks within a lock, it could be extremely difficult. It also poses an issue for security, since the door may not be locked and leave you vulnerable to burglars. There are fortunately simple fixes you can try to resolve the problem and get your door working properly once more.

First, remember to stay calm. If you panic and start playing around with your keys, you might just end up pushing the broken piece of the key even further into the lock, which could make the situation much worse.

Then spray WD-40 or another penetrating oil into the lock to make the broken piece slip out more easily. You can also use a screwdriver to break off any pieces that are stuck. If you happen to have a small piece of the key left sticking out, you can use a paperclip or some other metal object with a thin surface to grab it and pull it out. Both methods work, but be careful not to push the damaged key further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these items, you can bend a hook with needle-nosed pliers. You can also use a pair tweezers to grab and remove the last bit of the broken keys.

If you cannot remove the broken piece of key, use a lock deicer. It's available at most hardware stores and works by freezing any moisture that may be present within the lock.

If none of these solutions seem to work, it may be time to contact a locksmith. The experts at Fitlocks can quickly fix problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also modify your double glazing door repair (read this blog post from Ellis Wilkerson Technetbloggers) mechanisms to make them easier to operate. You can request a double-glazing repair online or contact us to discuss your needs.

Broken Cylinder

A damaged cylinder could pose a major Door repair security risk. A professional locksmith can easily repair the cylinder. Locksmiths will need to tap the cylinder to repair it. They can do this with an hammer or another tools, but the most effective way is to employ a long match or piece of wire. Then, put the match's end or wire near the keyway. After this, the locksmith can hit the lock to break it open. This is much safer than using a hammer, which could cause damage to the lock.

Overheating is the most common reason for cylinder heads to crack. This can happen when the cylinder block as well as the cylinder head are made of different metals, such as cast iron and aluminium. When various metals heat up and cool down at different rates, it can create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.

Corrosion is a different cause of cracks in the cylinder. If the cylinder head and the cylinder block aren't properly maintained, this can cause corrosion or rust and cause them to expand at a a higher rate than they should. This can cause cracks over time.

If your uPVC window or door lock is rigid and requires more pressure to turn, it could be due to a variety of causes. A malfunctioning locking mechanism, misalignment or an old handle are the most common causes of this problem.

Fortunately, this is an easy and inexpensive fix for most double glazing owners. A professional locksmith can usually fix this problem within one hour of arriving at your property. Depending on the needs of your home, they can replace the locking mechanism, change the window handles, or change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders that offer an additional layer of protection from burglars. It is a small cost to get the peace of mind that comes from knowing your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks could break. They are equipped with complex mechanisms that wear out over time. If yours breaks it's difficult to pinpoint the cause of the issue. Make sure you fix it properly.

Fixing your broken handle, regardless of whether it's the internal latch or locking mechanism will increase the security of your uPVC door and reduce the risk of draughts. It is costly to repair or replace your handle if it is not done correctly and can also damage the frame and the lock of your door.

Screwdriver Open the window remove the screw that holds the handle. The screw should be on the inside of the backplate, usually concealed by an eye-catching cap to conceal it for aesthetic purposes. It is important to not lose any internal parts of the handle, such as the plates and levers on either side. Keep them in the same order so that it is simpler to replace them in the event of a need.

Next, turn the handle so it's at 90 degrees to the window frame and loosen the screw at the back of the handle which holds it to the internal spindle by using a second screwdriver. Once this is removed, you should be capable of pulling the handle away and pull off the damaged spindle. Replace it with a brand new one, making sure that it's the same size as the old one (you can usually find these on the internet or in hardware stores) and screw it securely into place. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Ensure the new handle is installed, then close and test the handle. It should function smoothly, and you will be able to open your windows after a few times.

Be sure to double-check that your uPVC window is shut properly when you're working with the handle. If they're not then you may experience draughts and damp in your home as in addition to compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is often the case that the spindle within the handle breaks, rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These windows require a handle that operates an locking device within the frame of the window. The handle is connected to a centre rod that triggers a set of mushroom-like locking cams, these secure the frame of the window. If the dead latch mechanism does not open after the handle has been turned, it's likely the spindle is broken. This can be a problem that is frustrating.

There are solutions to this issue. A good locksmith can quickly and effectively fix the issue. A professional locksmith can disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This can be done without damage to the handle or the window frame.

Once the wheel has been removed, the technician will inspect the spindle and determine what caused it to break. This involves disassembling the spindle and examining every component, observing any damage or excessive wear. This procedure is typically carried out by technicians working in an environment that is clean.

The next step is to clean the damaged spindle, this will remove any dirt or other debris that might be obstructing its normal operation. After this the spindle is cleaned, it can be repaired or replaced. If it is replaced, the technician could use the dowel that is similar in size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers offer generic replacements, but if the design of your window is unusual then it will be necessary to find a woodworker or cabinet maker who can replicate the exact model for you. Once the new spindle has been installed it can be attached to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the handle is securely in place, you can use your upvc window repairs near me windows.