"The Automotive Key Repair Awards: The Most Stunning Funniest And Most Bizarre Things We ve Seen

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition

We've all been there - the car key won't engage the ignition. It occurs at the most inconvenient times, like when you're filling up your trunk with groceries, or returning to home from work.

Instead of panicking, there are several different options to get you back on the road. Here are a few of the most common automotive key repair issues and possible solutions:

broken key repair or bent keys

The most frequent reason an owner of a car cannot start their car is a bent key. Straightening the key is a simple fix. It may sound simple but it's important to do it with care. The key is very thin and even bending it a little can cause it to break.

To do this, you will need an area with a solid foundation, as well as pliers. Grab one end of the key using the pliers and bend it until it is straight. It is best to do this on an even surface or in a vice. After that, you can place it in the lock to test if it will turn.

If not, you might require a new one made. This will save you from needing to contact a locksmith and will ensure that your key works.

It's a good idea to keep a spare in your pocket so that you don't have a way into your vehicle in the event of a damaged key.

If you are having trouble inserting a bent or automotive key repair broken lock key, try applying some grease to it. This will make it easier to move through the cylinder and prevent it from becoming stuck. You can use a spray graphite powder or lubricant. If you are using a spray, ensure you attach the plastic tubing that came with it for an easier application. This will also help prevent moisture from ruining your key.

Spring pins and springs that are stuck

A pin (also known as a roll pin or a spring) can get stuck. Pins are a tiny piece of steel that measures between 5.1 and 7.6 cm (2.5-3.0 in) long with hollow ends. It is used to connect two components of machines. In most instances, it is possible to remove pins by simply pulling it out using your fingers or a wrench.

If you own a brand new vehicle that is equipped with an electronic key with a microchip in it, there's a chance the key needs to be programmed to work with your vehicle. This procedure can be easy or complex depending on the manufacturer and car.

Contact us if you require assistance with your automotive locks or keys! We are able to repair, replace or program almost every vehicle key.

Gear Selector

If your car's gear selector becomes stuck in park mode, it's important to bring it to an expert mechanic immediately. This is a safety issue and could result in serious vehicle damage if continue driving. This could also indicate larger issues with the transmission system itself, which could be expensive to fix.

Fortunately, the majority times, this issue can be easily fixed. The most common reason that the gear selector could get stuck is that one of the cable ends has snapped off or separated from the lever itself. The mechanic can fix this in a few minutes.

In certain instances, the bushing of the gear selector could be damaged or worn. Rubber covers are placed around the points of articulation of the gear system to keep it fluid. These covers work similarly to cartilage joints, and therefore must be healthy and flexible.

You can extend the life of your gear selector by doing a few basic things. First, you should avoid using the gear selector in extremely cold weather. This is because the gear control cables are prone to freezing and cracking. You should also replace your bushings, for instance those made by First Line, with high-quality ones.

These bushings are a critical component of your selection of gears and shouldn't be ignored. If you notice that yours is worn out, you should visit an auto repair shop that specializes Land Rover repairs. They will help you locate the right parts to restore your gear selector device. They can also offer various other services, including transmission service and maintenance.

Dead battery

If you turn your key in the ignition and hear nothing other than a click, your battery is dead. Most batteries last between three and five years and as they age, they go through an natural process that causes them to die prematurely. This is because the negative plates of your car battery will start to become coated with sulfate crystals.

A dead battery can cause your vehicle to lose power, which could cause the radio to stop working or electric window becoming unresponsive. If you've had difficulty starting your car during cold weather, this could be a sign that you need an upgrade to your battery.

It's possible that your problem is not an unresponsive battery but an issue with the charging system. A mechanic's check to verify that the alternator, serpentine belt and battery cables are all working properly could solve this problem.

Key fobs that are not functioning properly is a common issue with automotive keys. The key fob is a small unit that connects to the computer in the vehicle and relays signals and commands between the engine and accessory systems. The system could become confused or cease communicating with your vehicle when it is exposed extreme temperatures or gets wet.

Follow the steps in the owner's manual to reset the lost keyfob. Depending on your vehicle, you may need to open and close the doors, switch lights and other electronic car key repair near me devices off and on by pressing a specific sequence of buttons, or close and open the windows. If this doesn't fix your fob, it might need to be professionally programmed by an expert. It's worth trying these simple techniques before purchasing a new fob.

Ignition socket

Modern car keys are fitted with a transponder which, when inserted into the ignition, transmits the signal. This signal informs the immobilizer in the car whether the key is the right one to be used for starting. In the 1990s, car theft was an issue. Many manufacturers put in this transponder system to ensure safety and insurance reasons.

If you have a brand newer vehicle, the only way to replace your key could be through a dealership or by contacting the manufacturer directly. Write down the VIN (vehicle ID number) of your car before you leave. It is located on the front of the dashboard, door jamb, or in your owner's manual.

Bring your existing working key to an AutoZone participating store. An associate will employ a machine which will trace the contours of the blank key in order to accurately duplicate the original key. They will then cut the new key using a precise cutting machine onsite. If your key is a blade style, a key fob, or has a thick black or grey head on it, it'll need to be programmed to your specific car before it can be used to start the engine.