How To Beat Your Boss On Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and uPVC window repairs possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. However If windows with double panes are held in place by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you may think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, UPVC window repairs they could be affected by a variety of issues such as sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you cannot reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wears out. Fortunately, it's easy to fix a loose uPVC window handle yourself. The first step is to close the window and perform an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may have to be removed. It is important to remember that when it is about upvc window repairs (view website) you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. This can be easily fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with the breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to change the hinges on a window however it is easier if someone helps hold the frame.

Make sure that the upvc window repair near me hinges open and close in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to give suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also stop corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes an opening to appear between the sash and the frame. These can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. The interlock, which is on the hinge side of the window, may also be misaligned, and again it's possible to give them a clean but in some instances it could be necessary to get them replaced.

The next most common reason for draughts is window seals, these can become worn down or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes filled with some type of filler. They can be positioned on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.