20 Myths About Automotive Key Repair: Busted

Automotive Key Repair - What to Do When Your Car Key Won't Turn in the Ignition

We've all had this experience - the car key won't engage in the ignition. It happens at the most inconvenient times, such as when you're filling up your trunk with groceries, or when you're returning home from work.

There are many solutions that can bring you back on the way. Here are a few common car key repair issues and solutions for them:

Broken or bent key

The most common reason an owner of a car cannot begin their vehicle is a bent key. Straightening the key is a simple fix. This may sound simple, but it is important to do this carefully. The key is thin and could break if you bend it even slightly.

You'll need a solid work surface and a pair of pliers to accomplish this. Grab the key on one end with the pliers, then bend it until it is straight. It is best to do this on an even surface or in a vice. After that, you can place it in the lock to determine if it will turn.

If not, you may need to have a new key made. There is no have to contact a locksmith and your key will still work.

Keep an extra key in your purse so you don't have the ability to get into your vehicle if yours is damaged.

If you're experiencing problems with a broken or bent key, try applying some lubrication on it before inserting it into the lock. This will make it easier to move through the cylinder, and will prevent it from getting stuck. Spray lubricant or graphite powder. Make use of the plastic tube which comes with the spray to ensure an even more precise application. This will also help prevent moisture from ruining your key.

Stuck pins and springs

Sometimes, a pin (also known as a roll pin) or spring could become stuck. Pins are a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long and has hollow ends. It is used to connect two parts of machines. In the majority of cases, you can take a nut off by pulling it out using your fingers or a wrench.

If you have an older car that is equipped with a microchip key it is possible that the key needs to be programmed to work with your car. This process is different based on the car and manufacturer.

Contact us if you require assistance with your vehicle keys or locks! We can repair car key remote, replace or programme virtually any car key.

Gear Selector

If your car's gear selection gets stuck in park mode, it's important to bring it to a mechanic as soon as you notice it. This is a safety concern and could result in serious damage to your vehicle if you continue driving. This issue can also be a sign of larger issues with the transmission itself, which could be expensive to fix.

Most times, this problem is easily fixable. Most of the time, the cable that is connected to the lever can snap or come uncoupled. The mechanic can fix this within a couple of minutes.

In certain instances the gear selector bushing can get damaged or worn out. These are rubber coverings that go around articulation points in the gear system to help it shift more fluidly. They work in a similar manner as cartilage in your knees, so it's crucial that they stay in good shape and soft.

It's not uncommon for them to degrade over time, however there are some things you can do to extend their life. You should first avoid using the gear selection during extremely cold temperatures. This is because the gear control cables are often prone to freezing and cracking. You should also replace your bushings, such as ones made by First Line, with high-quality ones.

These bushings form an essential element of your selection of gears and shouldn't be ignored. If you find that yours is worn out, it's a great idea to go to an auto shop that specializes in Land Rover repairs. They can assist you in finding the right parts to fix your gear selection apparatus. They also offer many other services like maintenance and service for your transmission.

Dead battery

If you turn your key in the ignition but you don't hear anything except a click, your battery is dead. As batteries age, they go through a natural process which causes them to die early. The negative plates of your car battery will begin to be covered with sulfate crystals.

A dead battery may cause the loss of electrical power within your vehicle, causing the radio or electric windows to fail. If you've been having difficulties starting your car in cold weather, this could be a sign you need an upgrade to your battery.

Sometimes, the issue may not be caused by a dead battery, but a malfunction within the charging system of your vehicle. A mechanic's check to ensure that the serpentine belt, alternator and battery cables are all functioning properly can solve this problem.

Another type of key repair for automotive vehicles is a key fob that has stopped functioning properly. The key fob is connected to the computer in your car, and relays signals and commands between the engine and the accessory systems. The system may become confused or cease communicating with your vehicle when it is exposed extreme temperatures or gets wet.

Follow the steps in your owner's guide to reset the keyfob that was lost. Depending on your vehicle, you may need to open and close the doors, switch lights and other electronic devices on and off by pressing a specific sequence of buttons, or open and shut the windows. If this does not fix the issue, your device may need to professionally programmed that will require the assistance of a technician. But it's still worthwhile to try these easy steps before you decide to shell out for a new one.

Ignition socket

Modern car keys include an embedded transponder chip in them. It transmits a signal to a receiver in the ignition when they are inserted. The signal informs an immobilizer whether the key is in the right place for the car to start. In the 1990s, theft of vehicles became a problem that most manufacturers fitted this transponder security system into their vehicles for safety and insurance reasons.

If you own a newer vehicle, the only way to replace your key could be at the dealership or by calling the manufacturer directly. Before you go, write down the VIN number of your vehicle (vehicle identification number). It is located on the front of the dashboard, door jamb, damaged or damaged in your owner's manual.

Bring your existing working key to an AutoZone participating store. A staff member will use a machine that will trace the contours of the blank key to accurately duplicate the original key. They will then cut the new key using an exact cutting machine in-store. If your key is equipped with a blade, a fob or a thick grey or black head it will need to be programmed for your vehicle before you can use it to start the motor.