"The Window Repair Awards: The Best Worst And Weirdest Things We ve Seen

Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacements may be required in the event of serious damage, such as broken glass or a window frame that has been smashed.

Many other problems are fixable to extend the lifespan of windows. Some common problems include:

Cracked or Broken Panes

Whether it's an errant rock thrown by your lawnmower or a tree branch that has been blown by strong winds, cracked windows are not just unattractive but can lead to higher electric bills since the broken pieces allow cold air to enter your home. Fortunately, it's generally simple to repair windows with broken panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may need to use a utility knife to break loose any remaining putty or old glazing compound that has accumulated around the edges of the frame. Next, wipe down the glass's surface and the wood of the frame with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is waterproof around the frame's perimeter. This will prevent water from entering the frame through the crack and cause further damage.

A serious crack in double-paned glass could cause gas to leak between the panes, rendering your windows less efficient in insulating. If the crack is serious enough to compromise the quality of the glass or the glass has an inner pane completely missing, it might be time to contact a professional.

Cracks in thermal stress can occur when there's an extreme difference in temperatures between the inside and outside of your home, which causes the glass to expand or contract. If this happens to two parts of a window it's best to replace the upvc window repairs near me instead of trying to repair it.

If your windows are cracked and not yet ready to be replaced, clear tape can do a great job of securing the crack and preventing bugs from entering cold air. You can cut a nylon stocking large enough to completely cover the crack and then glue it to the surface with duct tape. This isn't a permanent solution however it can be useful in a pinch and it keeps insects and cold air from entering your home. If you notice cracks or blemishes on your older windows it is recommended to contact the local company to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is one of the most frequent problems that plague windows. It can damage a home's appearance and pose a safety hazard. However, it is possible to repair rotted wood. The first step is to ensure that the source of the rot has been dealt with. Look for leaks on the roof and other areas where water can enter the wood.

You will then need to remove the rotten parts of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After removing the decayed wood, you'll need replace it with new wood. Pre-treated wood is recommended for this project since it is resistant to rot. If you cannot replace the timber that has rotted you can apply filler and wood hardener to repair the damaged area. Many hardware stores will sell this kind of product. Follow the directions on the label of the product to ensure the most effective results.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant to the wood. A product such as Sikkens is a great choice for this task.

Use a two-part epoxy in order to protect the wood from further damage. It is simple to apply and gives an excellent finish. It is crucial to follow the directions on the label. After the epoxy filler is dry, you can rub the wood's surface. Start with a rough sandpaper then move to an easier grade.

You do not want to expose the damaged part to further moisture. It is therefore a good idea to cover the repaired area with an oil-based primer which will shield it from moisture. After that, you can apply the wood sealant that is waterproof.

The W won't open

A window that won't open can be the result of many reasons. The house may have settled or the wooden frames could have warped during rainy weather. Somebody may have secured them with a nail for security. However, with a bit of patience and the right tools, all windows that are stuck can be opened.

One of the most frequent causes of a window that isn't able to open is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, Window Repair hinges and locks. Additionally, hardware made of metal can be rusty when it comes in contact with humidity or direct sunlight. Maintaining these areas lubricated by spray grease can prevent corrosion and keep your window operating correctly.

The pulleys that raise or lower the window may become loose, or break. The components may lose tension and become obstructed if they are located at least two floors above the surface.

If you have trouble opening a door, use a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternatively, try running a hair dryer around the edges of the frame for a few minutes to warm the wood and allow it move more easily.

A damaged spring can be the reason for windows that aren't able to raise or lower. You'll need to check the owner's manual for additional details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they won’t open, then it's time to replace them. Homespire Windows & Doors provides windows that are energy efficient. Don't let the windows of your home go from functional to inoperable. If a window Repair isn't properly shut can make your home vulnerable to water damage and burglary. Contact us today for more information on our replacement windows as well as our services!