11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and fix the window. This also serves as an obstacle to stop intruders from making their way into your home. If the distance between the door and the window is substantial, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and upvc window repair energy-efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to get to the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window repair to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws until they stay in place.

If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window harder to clean and decrease its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your Upvc Window Repair windows are stiff to open, or loose and open with a breeze it could be the hinges that are at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. It is very easy to change a window hinge however it is easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also reduce the risk of a window repair sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges, also because of wear and tear, may become displaced, which causes an opening to appear where the sash joins the frame. If they are damaged beyond repair, it could be required to realign them. The interlock may also become disaligned. This happens on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace these.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs, your upvc windows will provide excellent security and insulation for your home. However, it is important to recognize that all windows have a life span and there may come the point when it's more efficient to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as you can.