11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. However when windows with double panes are held in place by internal beading, it will be more difficult to take out the existing panes and Upvc Window Repairs install new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the glass panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is significant, you may need to consider an alarm system that has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. As time passes, they may develop a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to get to the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it could be caused by the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform a test to ensure that it fits. The corners of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be applied. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze it could be the hinges that are at fault. They can be replaced by any competent DIYer and can be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos through our website can often solve the issue. We are always happy to offer suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the chance of windows getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become unbalanced due to wear, causing an opening where the sash meets frame. If they are damaged beyond repair, it could be necessary to have them realigned. The interlock may also become disaligned. This is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace the hinges.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will help block out cold air and keep your home warm and cozy!

Your upvc window repair windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.