11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is large, window repairs you might prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. Over time, they can be affected by a variety of issues such as sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can get at the frame. With the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window repairs. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it blows open with the breeze. These are easily replaced by any competent DIYer and can usually be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change a window hinge, but it's easier if someone else helps hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are happy to offer suggestions.

It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges can also become misaligned due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it may be necessary to get them re-aligned. In addition, the interlock could also become disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.