"The Defra Approved Back Boiler Stoves Awards: The Best Worst And The Most Unlikely Things We ve Seen

Defra Approved Back Boiler Stoves

There are many things to consider when choosing the right stove. From the enticing appeal of dual-functionality to the practical aspects of installation, compliance and safety.

Back boiler stoves that are approved by DEFRA are a fantastic solution to these issues. They produce very little smoke because they use the minimum amount combustion air.

Clean Burn Technology

A defra-approved back boiler is a great choice for those who want an efficient and clean burning stove that can warm your home and provide hot water to radiators. These stoves have an integrated steel boiler capable of heating the central heating system, while the fire is burning inside the stove. This is an efficient method to utilize wood burners.

Most of our defra-approved rear boiler stoves have a pre heated, airwashing system to keep the glass doors clean of soot and ash. They also have secondary combustion technology that is able to reburn any unburned particulates produced during the initial combustion. This helps to keep the flue gas clear, which results in more efficient burning and lower fuel costs.

Some of our stoves have been independently tested and deemed Defra SE (Smoke Exempt). The stoves accomplish this by having an air vent on the top that stops you from closing it all the way and thereby cutting off oxygen flow to the flame. This causes the fire to smolder instead of burning efficiently and release more pollutants into the air.

The moisture content of the fuel can be a major element in the amount of smoke that is released from the stove. We recommend burning only seasoned, dried wood with at least 20 percent to ensure that your stove burns as efficiently and cleanly as possible. The majority of our approved Defra stoves have a built-in moisture sensor which will alter the amount of heat burned when using wet wood.

Some manufacturers have even gone a step further to improve the efficiency of their stoves by incorporating an advanced clean burn system that is controlled by an chrome pull lever at the base of the stove that opens and closes the vent which draws air over the fire reburning the initial smoke created in the initial process of burning. This makes our Defra SE approved stoves even more efficient, which means you could save even more on your energy bills.

Easy to Clean

A defra-approved back boiler stove will allow you to run your central heating and hot water off the same system. This is done by making a loop that connects the other taps on the back-boiler (there usually are two) and your hot water tank. You can then use thermosyphoning in order to transfer heat into the home. This will also ensure that your boiler never runs out of hot water since it is supplied by the tank.

Clean your stove regularly to maintain its optimal performance. Begin by making sure that the stove is not hot to the touch, then wipe the body of the stove and the door with a clean, dry cloth. We suggest using a microfiber towel because they are less harsh.

After wiping down the stove's interior, it is recommended to clean the glass. Glass cleaners can assist in removing any marks or stains that are stubborn, and can be purchased from a variety of hardware stores. Glass cleaner is best used sparingly since too much of it can damage glass surfaces.

Over time the seals around the glass of your stove's and doors may begin to perish. It is important to replace the seals at least once a year to avoid gaps that allow heat to escape. This can be done using stove rope, which can be found in a majority of hardware stores.

If you own an Eco Design 2022-compliant back boiler on a defra-approved stove the combustion process will be more efficient than traditional wood-burning stoves. This is due to the fact that the most recent technologies have reduced the amount of part-burned combustibles that are released into the air. This has made stoves that are compliant more eco-friendly, and are also much less expensive to run.

A back boiler stove is always more expensive than a regular multifuel stove since it produces more hot water. It's still a cost-effective way to heat your house, as it can be used for central heating as well as hot-water.

Easy to Install

Boiler stoves can be used to provide heat for the area and hot water to your central heating system, making them a fashionable work horse that is an efficient and DEFRA Stoves Ratings cost-effective solution. Contrary to other multi-fuel stoves which must be connected to an existing gas boiler a wood burner with back boiler can connect directly to the main hot water and central heating supply without the need for a separate heating system.

A wood-burning stove with back boiler could be used to run your heating system entirely by renewable sources making them an eco-friendly choice than other stoves. Additionally, since they burn pellets and logs produce less emissions than gas or oil heating systems, making them a great choice for those concerned with the impact their energy use is having on global warming.

Although many people might be confused about how a wood-burning stove with a back boiler functions installing one is quite simple. The key is to ensure that the stove is correctly installed and linked to your heating system. Therefore, it is recommended to have this completed by a licensed heating engineer. They can assist you in making sure that your stove has been correctly installed and connected to the correct systems, in addition to making sure that all the safety devices are in place.

Defra Approved stoves or Defra Exempt Stoves as they are sometimes called they have met the Department of Environment, Food and Rural Affairs (DEFRA stoves ratings) standards for smoke emission levels. They can be used in Smoke Control Areas and have been tested and modified to ensure they have a clean and efficient combustion that can be easily used with both wood and smokeless fuels.

As as such, DEFRA approved stoves, like the Defra Exempt Dunsley Yorkshire and our most popular Hi-Flame Aidan are able to offer an extremely efficient combustion process with very low harmful emissions. They have been tested in accordance with the latest Eco Design regulations which restrict the amount of particulate matter CO2, NOx, and organic gases a stove can produce in normal operation.

Suitable for Smoke Control Areas

Smoke Control Areas are in place in all UK cities and towns. The burning of logs on older stoves or open fireplaces can result in a fine if smoke is deemed to be an issue. If you decide to choose the right appliance for your home, back boilers that are Defra-approved stoves will not be subject to these restrictions.

The Defra exempt wood burners are designed to utilize Clean Burn technology which ensures that the fuel used is efficiently burned with little smoke production. This means that you are able to enjoy a beautiful fireplace if you live in a smoke-free area however, you'll need limit the logs to approved smokeless mineral fuels.

To be in compliance with DEFRA requirements stoves requirements These stoves have airtight chambers that are precisely controlled for airflow and typically use triple airflow systems to ensure that combustion byproducts are burnt up before they escape the chimney. This helps not only stop any smoke from causing nuisance, but also reduces soot build up which can block the flue and reduce gas efficiency.

It is essential that you purchase your Defra approved stove from an expert local Retailer who will ensure that the correct size stove is chosen for your home to ensure the highest efficiency in heating and that it is properly installed by a HETAS registered installer. They can also help you choose the best type of chimney liner for a safe installation, and also provide guidance on whether your house requires additional ventilation.

Modern DEFRA approved back boiler stoves are a world away from open fires of the past and traditional wood burners, and you are guaranteed a minimum of 75% heat efficiency that will not only save you money, but also decrease your the environmental impact. Additionally, DEFRA approved traditional stoves approved stoves are capable of being used in a smoke controlled space and will require a minimum of 6mm stainless steel twin wall chimney liner, which is less expensive than the more expensive 12mm liners that are required for Ecodesign stoves.

If you're unsure regarding whether your home is within a smoke-control zone, you can inquire with your local council. They can provide you with all the latest information. The majority of reputable stove manufacturers have a Defra-exempt category in their product line to allow you to determine if these appliances are in the right category.