The Most Common Mistakes People Make With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is essential to clean and oil UPVC doors and windows regularly. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double glazing near me panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap between the door and the window is large, you might need to consider a security screen that also includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and verify the an appropriate fit. If you are happy with the fit of the window repairs, tighten the screws to secure them in place.

If you are unable to reposition the hinges, window Repairs you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze It could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It is very easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused either by opening the window improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, creating gaps where the sash and frame meet. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window, can also become misaligned, again it may be possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.