20 Autowatch Ghost Immobiliser Fitting Websites Taking The Internet By Storm

ghost immobiliser Fitting Immobiliser Installation

Protect your pride & joy from thieves by adding a ghost immobiliser. Our TASSA-certified system guards against key cloning, hacking, and bypassing the vehicle immobiliser.

The system is hidden in the wiring loom in your vehicle, so it is completely inaccessible to anyone looking. It works by creating pin code push sequences through existing buttons on steering wheel, door cards, and centre console.

No circuit cuts

A car is a precious item that takes many years of effort to get, which is why owners want to protect their vehicle against theft. However, traditional security devices such as alarms and wheel locks can easily be cut off or jumped by thieves. Ghost immobilisers, on the other hand is a highly efficient solution that is silent and cannot be identified by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash and door panels to generate an unique pin code that you only know. The code can be changed at any time, and can include up to 20 digits depending on your preferences. It also comes with a safe emergency code that you can utilize should you forget your PIN.

The ghost immobiliser can also be useful to prevent the relay box inside your home from transferring the signal of your car key, which will open the doors and start your vehicle. It also blocks high-tech methods to steal your vehicle, such as OBD port hacking. The device is small and weatherproof, which means it's difficult to see and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. It is ideal for people who are planning to sell their car in the near future. It is also much quicker and simpler to install as compared to a factory-fitted unit.

The Autowatch Ghost is a groundbreaking next-generation device that prevents vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. This is a stealthy device that can be put in with no wires cut and does not require additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA-certified and can be linked with an International Security Register. Owners will be able to rest easy, knowing that their vehicle is secured from theft.

No scanning by RF

If you've put lots of time and money into the customisation of your vehicle, you'll need to secure it from theft. One way to accomplish this is to install an immobiliser, which will stop the engine from starting until you enter a unique PIN. Using the buttons on your steering wheel as well as the dashboard, you can create an up to 20 digits long which is only accessible to you, and ensure that only you have access to your vehicle. It is also possible to create a service and valet mode that will allow you to start your car for a short period without entering the PIN. This allows your technician to work on your car without you being present. This is a great feature for those who want to reduce time and make their lives easier.

A ghost immobiliser is a next generation device that connects to your vehicle's CAN data network, and uses the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to blend in with the rest of your vehicle, since it doesn't emit any noise or LED indicator. It can be installed anywhere on your vehicle without affecting the aesthetics.

This stealthy device is approved by TASSA and can reduce the cost of insurance. It also has a tracking function that allows you to locate your vehicle even if it's been stolen. This is particularly useful if have a costly or rare vehicle that you've invested a lot of time in customizing.

The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to remotely start your vehicle in the event that you have forgotten your PIN or are unable to get into the vehicle for some reason. This feature is perfect if you have to run errands or pick up your children but don't want to let someone else drive your car. It can also be helpful in the event that you need to bring your vehicle in for servicing or repair.

The Ghost is unique in that it does not transmit or detect radio frequencies which means it's not detected by thieves who employ RF scanning and code grabbing technologies. It can also protect your car from key cloning and ECU swapping, which are the most common methods used to steal cars.

No key to cloning

Ghost immobilisers are an excellent option to protect high-end vehicles. They are designed to stop key copying. They prevent your car from starting until an additional PIN code is entered alongside the normal key fob. This makes it difficult for thieves to steal your vehicle, and may even deter them from attempting. This is a great option if you've invested a lot of time and money in customizing your vehicle, or own a rare or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely hidden, meaning that there is no visible indication of its presence inside the vehicle. It is also impossible for a burglar to detect the device by using radio frequency scanning or code grabbing technology. This means that a burglar will have to spend longer in order to get your vehicle.

A criminal must be aware of the pin code and the location of the ghost in order to get around it. The pin code is unique to you and can change it as often as you want. The pin code is easy to remember, but mathematically unattainable for someone else to understand. The engineer will also provide an emergency pin code in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any location of your vehicle. It is compatible with all vehicles and is fully customisable to match the style of your car. It is also affordable and easy to use. The device can be transferred to a different vehicle, as long as it is compatible with the new vehicle.

The CAN bus can be used with other security features. For instance, it could detect damage to your vehicle and notify the owner. It can also stop the engine if the car is tampered with. The system can protect your vehicle from hacking and key duplication. It also detects vibrations and contact with the vehicle. It will also notify the owner if the vehicle is moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from getting into your vehicle to disable the alarm, Ghost Immobiliser Fitting deactivate your key fob, or code new keys. This technology is an improvement over the traditional methods used by thieves to steal vehicles in the past. The CAN data networks means that your system won't be affected by disconnecting or change your battery.

The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that guards against key-cloning, hacking, and replica car ghost immobiliser theft. It is not equipped with LED indicators or key fobs, instead leveraging the buttons in your steering wheel, centre console and door panels to let you create a unique PIN code sequence (up to 20 button presses) that must be entered first before you can drive your car away.

Modern thieves use diagnostics to detect circuit cuts on your vehicle and can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It is not detected by diagnostic tools of a professional. It can be put in on vehicles with anti-theft devices.

Another advantage of the Ghost immobiliser is that your vehicle can only be started by a person who has access to the PIN number and has physical access to your car. This is an advantage over traditional security systems which can be tampered with by simple modification of cables or a screwdriver.

If you forget your PIN you can reset it easily using the emergency PIN reset function on a mobile device or computer. This is helpful when you want to start your car after it's left in a garage, or the valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It features a QR fingerprint system to identify individual parts that allows for the return of stolen items in the event that they are found. It can also be set to'service mode' which permits the engine to be started when your car is in a garage or with valet parking however, you'll need to enter your PIN again to exit the car.