3 Ways In Which The Replacement Window Handle Can Influence Your Life

Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are simple to install and feel as good quality. It is important to be aware that the handle you pick for your window has to be appropriate for your.

The step height is the most crucial factor. This is the distance between the handle and uPVC Replacement Window Handles the frame or base. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can buy a variety of replacement handles made of upvc. There are a variety of designs and colors to pick from, and you're certain to find something that is compatible with your existing windows. It's easy for you to make an impulse purchase especially when the handle is damaged. It is therefore advisable to look over a few aspects before buying the replacement. The first thing to think about is what kind of upvc handle do you currently have and what the difference between the kinds is. The table below lists the most common handles so that you can select the best one to match your window.

Espag handles are the most commonly used and are commonly found on modern double-glazed windows. They are typically attached to the frame using two screws that are screwed into the frame from both sides, above and below.

The spindle bar on the back may be of different sizes, and can determine if they are left-handed or right-handed. It's important to take the measurements of the handle you currently have to ensure that you get the right replacement.

Typically fixed by two bolts, similar to the Espag handle, but they have a low projection from the frame which means that the arm will not poke through your blinds. This is a great option when you want the handle to blend in with your blinds and have upvc windows.

Cockspur handles are similar to Espag handles but they have a nose which closes over a wedge that rests on the window frame. This kind of handle is available on older wooden and upvc windows.

Tilt and turn handles are usually found on casement windows. They can be operated by turning the handle or pressing on the top of the window. This opens the window from the inside and allows you to clean outside without needing to step out on a ladder or walk over the fence. These are also an excellent option for those with limited mobility and enhance security and access to the home.

Hints and tips

There are a variety of different types of uPVC window handles, and many people will need to replace them at some point. If this happens it's a good idea to be aware of a few tricks and tips that can make the process go as smoothly as it can.

Find out what kind of handle is located at your residence. Depending on what the handle is connected to and the locking mechanism it utilizes, it may be necessary to replace the entire handle and lock. If the roller cams or shoot bolts (espags) are stuck or are seizing up, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles follow industry standards and are very alike. This allows for a relatively easy process. The first step is to remove the screws from the handles, usually pozi-drive screws. Once the screws are removed you will be able to dismantle the handle.

If you've got the handle broken from the handle, it's recommended to make an inventory of how much of the spindle extends from the base of the handle. This will help you to determine the length of the spindle for a replacement windows handle. To do this, take a measurement of the square peg sticking out from the base of the handle and use it as a reference.

This is particularly crucial for inline uPVC window handles as they will always be straight and can only open left or right, and they won't operate in the middle. If you're not sure of the kind of handle you have at home, it might be beneficial to get a handle from a neighbour's home and see how it functions to get an idea.

Another excellent method to figure out what the hand of the uPVC window handle is is to look at the way the handle turns when operating. Handed handles will turn either clockwise or anti-clockwise. If you are unsure, ask someone to open the window with the handle and observe what happens.

Measure the spindle

It can be difficult to pick the correct replacement handle for your window since there aren't all handles that come in the same size. It is important to accurately measure the spindle when fitting a new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles that operate in different ways so it is vital that you know what type of handle you have as well as the type of locking system.

The spindle of the handle extends from the handle's rear and is connected to the lock gearbox inside the window frame. When you turn the handle, this turns the lock inside the gearbox and opens the window. They are typically utilized on uPVC casement windows and they can be locked with keys to provide extra security.

Cockspur handles are equipped with an "nose" which closes over an elongated striker block that is placed on the frame and they are usually found on older double glazing replacement windows-glazed uPVC windows. They are also simple and can be locked using keys. It can be more difficult to replace these handles as they aren't as common as the espagnolette handles.

If you have a tilt and turn uPVC window, then you'll need to get a special type of uPVC replacement handle with a different locking mechanism. This will be able to tilt the window open but also rotate it back and forth to open it fully. It is essential to select a handle with a spindle that is at least 55mm to be able to reach the window frame.

You can use the same method to remove and replace this kind of uPVC handle, but you will need to be cautious when removing the old one. It might be necessary to open the window a bit wider than usual to reach both screws that hold it to the frame. Once you have put in your new uPVC handle and ensured that it is in the proper position, then you can tighten the screws and test the lock to ensure it is working correctly.

Install the new handle

If you have the proper replacement handle, it will simply screw into the appropriate position. It will require a screwdriver, and an electric one may be a lot easier. When screwing the screws in, it is important not to over tighten the screws as this could cause the handle to break or warp.

Inserting the spindle is a second important step to attach the new handle. The spindle is a part that is inserted into the handle to control the locking mechanism of the window. It is vital that it is installed correctly since this will ensure that the window is able to be closed and opened with confidence.

There are many different types of uPVC handles. These include:

Espagnolette Handles - these are inline handles that can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curved shape that can be useful for hard-to-reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows to operate the opening and closing mechanisms.

The majority of uPVC window frames are fitted with these. They are often referred to as 'Bay Windows in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. There is no need to change the entire uPVC windows because of a damaged window handle. There are several easy steps you can take to fix and replace a damaged uPVC window handle.

By identifying the kind of window you have, calculating the length of the spindle and buying a replacement handle you can repair your broken window handle. It is important to take your time and prioritise safety when working with windows and tools, but this is a simple task. It could be the difference between having a safe and secure home, or a window that can be easily opened. Bridgewater Glass is the place to go if you have questions or would like to speak to an expert regarding replacing your window handle. We have a group of experienced and knowledgeable experts who can assist you with any problems you might be experiencing.