11 Strategies To Completely Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap between the window repair and the door is substantial, you may prefer security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC Window Repair is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to access the frame. After that, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. The majority of the time it is due to screws that have become loose over time. However, Window Repair it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and perform a test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and decrease its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window repair.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze It could be hinges at the fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges may also become unbalanced due to wear, creating a gap between the frame and sash. If they are damaged beyond repair, it could be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it may be possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.