11 Ways To Totally Block Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and upvc Window repairs are durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap between the window and the door is large, you might need to consider security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you can't reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window hinge is essentially a simple process, but it's easier to do when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to give assistance.

It is also essential to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the chance of windows sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear can become misaligned, this can cause gaps to develop where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. In addition, the interlock could be misaligned. This happens on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace these.

These seals can wear down or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window repairs with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your upvc window repair it is recommended to speak with a professional as soon as you can.