17 Reasons Why You Should Be Ignoring Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. However If you have double pane windows that are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window repair near me panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and UPVC Window Repairs protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea tape the gap once the glass has been removed. This will keep water and drafts from entering your home until a professional is able to fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the door and the window is significant, Upvc Window Repairs you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, with time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the size of the window, tighten the screws to secure them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also loosen. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with the breeze. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. Changing a window hinge is essentially a simple process but it can be simpler when you have a person to help hold the frame in place.

Make sure that the uPVC hinges are open and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us photos via our website will often solve the issue. We are always happy to give advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also lower the possibility of a window repair sticking and help prevent corrosion. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become misaligned due to wear, which can cause gaps where the sash and frame meet. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be positioned on top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach a point where it is more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.